output array
英 [ˈaʊtpʊt əˈreɪ]
美 [ˈaʊtpʊt əˈreɪ]
网络 输出数组
双语例句
- The WHILE loop scans the input array; when an element begins with the required area code, it is added to the output array.
WHILE循环扫描输入阵列；在元素以所需的区域代码开始时，将其添加到输出阵列。 - If your nonbatch version of the operation can also throw a fault, then you should have a way to plug the fault data into the output array.
如果操作的非批量版本也可以抛出错误，则应通过一种方法将错误数据插入输出数组。 - The version presented in Listing 1 uses a loop to process the input array and populate the output array.
清单1中的版本使用循环来处理输入阵列并填充输出阵列。 - Parse simply renders the output as the array that I mentioned before.
解析操作仅将输出作为我之前提到的阵列呈现。 - To control which input elements are placed in the output array, we use an input filter.
为了控制放入输出数组中的元素，我们使用一个输入过滤器。 - Notice also a new attribute introduced in this listing: The keyAttribute attribute, which tells XJConf which element attribute to consider when it sets the keys of the output associative array.
清单中还引入了一个新属性：keyAttribute属性，它告诉XJConf设置输出关联数组的键时使用哪个元素属性。 - In fact, the output is Array ( [ 0]=> [ 1]=>), meaning a match was made, but nothing was captured.
实际上，输出是Array（[0]=>[1]=>），表示找到一个匹配，但是未捕捉到任何内容。 - The input to the flow is an array of employee identifiers, while the output is an array of status objects, indicating whether the payslip processing succeeded or not.
流的输入是员工标识符的数组，而输出是状态对象的数组，指示工资单处理是否成功。 - By setting the keyAttribute to letter, XJConf automatically assigns the value of the letter attribute of every element to the corresponding key of the output associative array.
通过把keyAttribute设置为letter，XJConf自动将每个元素的letter属性的值赋给输出关联数组对应的键。 - The first example, written in PHP, will capture the output of the shell command "df-h," place the output into an array, and then examine each line of output against a regular expression.
采用PHP编写的第一个示例将捕获Shell命令“df–h”的输出，将输出放在一个数组中，然后根据一个正则表达式检查输出的每一行。 - The manufacturing process of the latter is to combine the output of ARRAY and color filters, which involves more manual work.
后者将ARRAY制程的的产出与彩色滤光片组合，涉及较多人工作业。 - This paper analyzes the output SINR of adaptive array antenna in the presence of amplitude and phase errors.
以自适应阵列的输出信干噪比（SINR）为对象，研究了通道幅相不一致性对它的影响。 - The results of the simulations show this method can keep the amplitude of the desired signal, restrain the interference signal, and keep the output power of array to minimum.
仿真表明，采用自适应算法能够在保证接收方向回波信号幅度保持不变的条件下，抑制干扰信号，且使阵列输出功率最小。 - This paper analyzes the effect of channel mismatch on the performance of adaptive array. The relation between channel mismatch, jamming power and output SINR of adaptive array is given.
本文分析了通过失配对自适应阵列性能的影响，给出了通道失配、干扰功率与自适应阵列输出信干噪比之间的关系。 - Basic theory of array signal processing had been studied, mathematical models of the signal arriving at the array are analyzed, the narrowband and broadband expressions of the output data of array with arbitrary geometry are given, and the typical array manifold is deduced.
系统研究了阵列信号处理的基本理论，分析了阵列接收信号的数学模型，给出了任意几何结构阵列输出的窄带和宽带表达形式，并推导了典型阵列的阵列流形。 - According to the results of experiment, output power of photovoltaic array has been fully utilized, the time of overcharging has been shorten greatly, charging efficiency has been also improved and battery lifetime has been prolonged due to higher-level state of charge operation.
实验结果表明，本系统充分利用了光伏阵列的输出功率，缩短了过充阶段时间，提高了充电效率，克服了大多数光伏系统中蓄电池欠充的缺陷，延长了铅酸蓄电池的使用寿命。 - Among these methods which are used to calculate output of solar array, some method can solve out power, but not current and voltage;
在求解太阳电池阵输出的方法中，有的方法能求出输出功率，但不能求出输出电流、输出电压； - Tore duce effective the multipath disturbance and multi-user interference and improve the SNR, time-domain equalizer is employed at the output of each array element of smart antenna.
该智能天线在每个阵元输出带有时域均衡器，可以在多径环境下有效消除多径干扰和多用户干扰，提高信噪比。 - A New Method for Calculating Output of Space Solar Array
一种计算空间电池阵输出的新方法 - Stable output of LD array pumped CW and Quasi-CW Nd: YAG laser
半导体激光列阵泵浦连续和准连续Nd：YAG激光器稳定输出 - On output autocorrelation matrix of array antenna and its error
阵列天线输出自相关矩阵及其误差分析 - Minimum mutual information blind equalizer for multi input multi output fading channel of array antenna system is proposed.
提出了多输入多输出衰落信道的基于广义高斯分布近似的最小互信息盲均衡器。 - Most of present spatial spectrum estimation methods is only suitable for the situation that the digital output of all array elements must be known, namely the methods based on element level.
目前已提出的空间谱估计方法绝大多数需要已知所有阵元的数字化输出信号，即为基于阵元级的方法。 - Through the arithmetic of spatial mapping and image restoration with the output signal of detector array, the spatial-temporal distribution of the laser beam parameters is obtained.
通过对采集得到的探测器响应信号进行空间映射计算和图像复原，得到激光束的光强分布参数。 - Odor data is the electric signals from the output of the sensor array.
气味样本数据是捕获的传感器阵列所在电路的调理电信号。 - Signal-to-noise ratio output of a hydrophone array is much more depending on the spatial correlation structure of the noise field.
水听器阵的输出信噪比被证明依赖于噪声场的空间相关结构。 - Test results shows that compared with the solution by multiplying bypass diode, this method has superiority in improving output power of photovoltaic array, the feasibility and effectiveness of this proposed method is proved.
试验结果表明，相对于并联旁路二极管的方法而言，本文提出的方法在提高光伏阵列的输出功率方面具有优势，从而验证了所提方法的可行性和有效性。 - Basic Array signal theory had been studied, mathematical models of the signal arriving at array are analyzed. the narrowband of the output data of array with arbitrary geometry are given. 2.
本文的主要研究工作主要有以下几个方面：1.研究了阵列基础理论，分析了阵列接收信号的数学模型，建立任意结构的阵列窄带信号模型，并推导了典型阵列的阵列流形。 - After three output signal of three-beam array detecting system are integrated into one signal, fractional Fourier transform ( FrFT) is used in feature extraction of integrated output signal and FSVM is utilized in target identification.
将三波束阵列探测系统输出的三个信号融合成一个信号，研究了使用分数阶傅里叶变换实现对融合后输出信号的特征提取，再使用FSVM进行分类的目标识别方法。 - Such as overall system structure design, basic processor design, recurring matrix inversion processor array design, output prediction processor array design, control increment calculation, parameter identification, and so on.
包括系统的总体结构设计，基本的处理器单元的设计，递推求逆算法的处理器阵列设计，输出预测的处理器阵列设计，控制增量的计算，参数辨识等。